CT injector is applied to the injection of a contrast agent in enhanced CT scan  and CT angiography.

Characteristic:
CT injector is controlled by a computer system. It adopts specialized syringes and other accessories, so the cost of injection is very low. The delivery rate and volume satisfy all of the criteria required by enhanced CT scan.
●The highest delivery rate: 9.9ml/s, the lowest delivery rate: 0.1ml/s. The large range of rate from 0.1ml/s to 9.9 ml/s satisfies all of the requirements for any enhanced CT scan. One to four phases injections meet a variety of CT injection’s need.
●Large-size disposable syringe meets various volume requirements for any enhanced CT scan.
●The highest pressure limit increase the safety.
●Relay input/output interface connects to different CT scan facilities in the safest manner.
●Small diameter pipe tube reduces the waste of contrast agent, and synchronizes the delivery of contrast agent and scan.
●Long-distance control box enables the user to monitor it in either control room or scanning room.

Specification:
●Electrical requirement: AC 198-242 V 50/60Hz.
●Syringes:200ml syringe disposables or 100ml specialized syringe disposables.
●Connection tube:150cm(59in)
●Flow Rate: 0.1 to 9.9 ml/sec (in 0.1 ml/sec increments)
●Volume:1ml to max. syringe capacity (200ml or 100ml) in 1ml increments.
●Pressure Limits: Programmable from 100 to 300 psi in 50 psi increments
●Scan or injection delay:0-255seconds
●Storage capabilities:100injection protocols
●Injection Capabilities: 1 to 4 phases